DK 120

TECHNICAL DATA SHEET | TDS CLICK HERE

SAFETY DATA SHEET PART-A | SDS CLICK HERE

SAFETY DATA SHEET PART-B | SDS CLICK HERE

DK 120™ is a specially formulated 67% solids hybrid solvent based polyaspartic coating designed for application over interior concrete, cement based overlays, or as a top finish coat on epoxy systems. DK 120 provides a low VOC (330 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss wear surface. The high performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. As a vertical wall coating, it enhances anti-graffiti properties.

DK120’s rapid cure time eliminates excessive waiting to return a floor to service. Unlike many polyaspartic’s, it has a user-friendly pot life of approximately 20 – 30 minutes. Turnaround time for a floor may be as little as 5 – 6 hours. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

Avoid application on extremely hot days or during wet, foggy weather. Basic rules include:

• Apply with ambient and surface temperatures ranging above 32°F (0°C) and below 90°F (32°C) and that will remain
  within ranges for at least 12 hours following application. Note: as temperature falls below 60°F (10°C) part B will
  “thicken”. To empty part B from container will require moving into a heated space until the viscosity allows product
  to pour.
• Surface temperature must be a minimum 5°F (3°C) above dew point.
• Relative humidity should be below 75%.

67% Solid Polyaspartic Cure Rates

Cure Rates @ 80°F (27°C) 
Dry to touch = 1-2 hrs.
Light traffic = 3-4 hrs.
Heavy Traffic = 24-36 hrs.
Full cure = 1 – 2 days

Cure Rates @ 40°F (4°C)
Dry to touch = 4-5 hrs.
Light traffic = 24-36 hrs.
Heavy Traffic = 3-4 days
Full cure = 7 day

DK 120 Quick Facts

Components | 2 (A+B)

Type | Solvent Based Polyaspartic

Mix Ratio | 4:1 (3-parts A to 1-part B)

Packaging | 1-Gal Kit or 5-Gal Kit

% Solids | 67%

VOC | <330 g/L

Coverage Rate | 300-400 sq. ft. per/gal