ElastoShield
ElastoShield by SureCrete is a ready-to-use, elastomeric liquid membrane. Formulated for concrete waterproofing and crack prevention.
$180.65 – $275.00
ElastoShield is a ready-to-use waterproofing and crack suppression elastomeric liquid membrane that provides waterproofing. This waterborne system has no solvents and requires no catalyst, which eliminates pot-life problems. Typical applications include concrete, concrete-block, polystyrene, plywood, OSB, cement back boards, ceramic tile, stone, and foam.
it provides superlative flexibility and elongation with waterproof properties that allow it to span cracks and voids in substrates. Quick dry time between coats reduce job time. Upon cure, the membrane will not soften with high temperatures or become brittle with lower temperatures.
If spills occur, they can be cleaned up with soap and water before the product cures.
How can ElastoShield be applied?
Since the product is a single component formulation, this allows you to apply it via brush, roller, or airless sprayer. No special safety equipment or respirators are required (unless sprayed).
What Surface Preparation Is Needed?
ElastoShield is not a shortcut for poor surface preparation. Surface must be clean. Free from dust, dirt, oil, grease, paints, glues, sealers, curing agents, efflorescence, rust, and algae/mildew. Cracks or voids that span more than 1/8 inch must be treated independently prior to application.
ElastoShield Coverage Rate
Varies upon substrate porosity, texture, and application method. Typically 150 sq. ft. per gallon.
Technical Data Sheet | TDS Click Here
Safety Data Sheet | SDS Click Here
Reviews & Ratings
Only logged in customers who have purchased this product may leave a review.
Reviews