SC Polymer

SureCrete’s liquid concrete polymer concentrate is a 55% solids copolymer emulsion (vinyl acetate-ethylene or VAE) designed for use as a fortifying admixture for cement based products. It offers  improved adhesion, reduced permeability, and increased abrasion resistance. When used inconjunct ion with a concrete overlay it will eliminate pin holes.

Typically, Concrete Polymer Concentrates will enhance the properties of any concrete and is typically used for patching materials, bridge decks, grouts, stucco, decorative thin cement-based overlays.

What Surfaces is SC Polymer Used On?

There is a wide variety of surfaces that a polymer concentrate is used on. It can be used in two-component overlays and as a bond enhancer on concrete. It is ideal for helping overlays endure freeze thaw cycles. Or to block outgassing which can create pin holes in freshly troweled overlays.

Can Polymer Concentrate Create Other Products?

SC Polymer is concentrated and is not designed to be used without diluting. Below you will find the following dilution rates that can be used. The formula of dilution should be equal parts of clean potable water to SC Polymer (Example 2:1 equals 2-parts water to 1-part SC Polymer)

Sure Prime                    1:1        27.5%  Solids

Eco Prime                     4:1        11%    Solids

Dual Component        2:1        18%    Solids

Overlays                       3:1        13.8% Solids

TECHNICAL DATA SHEET | TDS CLICK HERE

SAFETY DATA SHEET | SDS CLICK HERE