SureCrete’s XS-PROcast concrete countertop and furniture mix is a single component, just add water, pourable concrete bag mix that is designed specifically for cast-in-place projects where a troweled finish is desired. The precise blend and fine aggregates, cement and dry polymers creates a mix that is suitable for a variety of applications and casting techniques.
TECHNICAL DATA SHEET | TDS CLICK HERE
SAFETY DATA SHEET | SDS CLICK HERE
XS PROCAST is a single component, just add water concrete bag mix that is designed specifically for cast-in-place projects where a troweled finish is desired. The precise blend and fine aggregates, cement and dry polymers creates a mix that is suitable for a variety of applications and casting techniques. The material can also be mixed to a low-slump clay like consistency for hand packed finishes or a flowable material for smooth finishes, simply by adjusting the amount of water mixed with the dry material (up to 4.5 quarts of water per 50 pound bag).
It’s natural white color is beautiful as is or can be combined with Surecrete’s extensive line of integral pigments and topical colorants for an unlimited range of colors and effects. To complete and protect your project, XS PROCAST is compatible with several Surecrete Sealers and finishes to ensure your project not only looks great, but also stands the test of time. Projects include, but are not limited to: Indoor or outdoor countertops, Tabletops, Wall caps, Vertical Panels, other Architectural Elements.
PROcast Pour-in-Place Application
First pour material into your prepared molds, making sure that you carefully consolidate the material along the edges and openings in your formwork. Start at
one end and fill the mold to the top and work your way from your starting point to the end. Next, as you place the material, continue to carefully consolidate the material within the forms and along the edges. This will help eliminate voids and open pockets in the slab. This can be done with a smooth rod or short piece of rebar. Mechanical vibration can also be used within the casting and along the form work provided your mold is built properly.
After the material is consolidated and leveled with the surface, use a screed board in a sawing, back and forth motion to perform the initial process of closing up the surface. Once this is done, use a magnesium float to take out any ridges and close up any imperfections in the surface. The concrete must now be allowed to set up to a consistency where you can achieve a clean thumb-print impression in the surface. At this point, the use of steel concrete finishing trowels can be used to further close up and smooth out the surface.
XS PROCAST QUICK FACTS
Packaging | 50 lb. Bag
Cement Type | White Portland
Mix Ratio | 4.5 quarts of clean water per bag
Coverage Rate | 2 sq. ft. @ 2 inch
Reviews & Ratings
Only logged in customers who have purchased this product may leave a review.