ColorTec 180

ColorTec 180 is a dual-component, 88% solid, solvent-based, pigmented (colored) polyaspartic coating. Available in over 200+ colors and packaged as a 1-gal kit or 4-gal kit. For professional use only. Typical coverage when used as a solid color floor to flake into, is 150-200 sq. ft. per gallon.

$208.85$767.65

TECHNICAL DATA SHEET | TDS CLICK HERE
SAFETY DATA SHEET PART-A | SDS CLICK HERE
SAFETY DATA SHEET PART-B | SDS CLICK HERE

 

ColorTec 180 is a high gloss, commercial grade, colored (pigmented) floor polyaspartic coating specially formulated to dry fast with an 88% solids content. As a hybrid solvent-based colored polyaspartic, it is for professional use only. Unlike many polyaspartic’s on the market, it is a high-performance coating with a user-friendly pot life of approximately 10 minutes and the ability to create a moderate build (7 mils cured) base coat for full broadcast flake system. Turnaround time for a garage floor flake system may be as little as six hours.

ColorTec-180  provides a low VOC (less than 150 g/L), penetrating, film forming, high gloss, UV stable, fade resistant pigments for a durable colored floor as well as a base coat on a flake floor system. The rapid cure time eliminates excessive waiting to return a floor to service. It is ideally suited for both commercial and residential settings where high traffic is present: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient garage floor flake system is desired.

The ability to create a beautiful flake floor in just one day can open many doors regarding not only project locations but also scope. Large retailers will be much more willing to close their doors early and have work performed overnight than to be unavailable to their customers for an entire business day. Please remember that systems using the PFC-280 product like the One Day Polyaspartic Garage Floor flake system are intended to be applied only by trained professional contractors.

Avoid application on extremely hot days or during wet, foggy weather. Basic rules include:

  • Apply with ambient and surface temperatures ranging above 32°F (0°C) and below 90°F (32°C) and that will remain
    within ranges for at least 12 hours following application. Note: as temperature falls below 60°F (10°C) part B will
    “thicken”. To empty part B from container will require moving into a heated space until the viscosity allows product
    to pour.
  • Surface temperature must be a minimum 5°F (3°C) above dew point.
  • Relative humidity should be below 75%.

 

88% Solid Polyaspartic Cure Rates

Cure Rates @ 80°F (27°C) 
Dry to touch = 2-3 hrs.
Light traffic = 6-8 hrs.
Heavy Traffic = 48-72 hrs.
Full cure = 2-3 days

Cure Rates @ 40°F (4°C)
Dry to touch = 6-8 hrs.
Light traffic = 24 hrs.
Heavy Traffic = 4-6 days
Full cure = 5-7 day

 

ColorTec 180 Quick Facts

Components | 2 (A+B)

Type | Pigmented Solvent Based Polyaspartic

Mix Ratio | 3:1 (3-parts A to 1-part B)

Packaging | 1-Gal Kit or 4-Gal Kit

% Solids | 88%

VOC | <150 g/L

Coverage Rate | 150-200 sq. ft. per/gal

Reviews & Ratings

Reviews

Only logged in customers who have purchased this product may leave a review.

My cart
Your cart is empty.

Looks like you haven't made a choice yet.