XS 327 AM

TECHNICAL DATA SHEET | TDS CLICK HERE

SAFETY DATA SHEET PART A (Matte) | SDS CLICK HERE

SAFETY DATA SHEET PART A (Semi-Gloss) | SDS CLICK HERE

SAFETY DATA SHEET PART B | SDS CLICK HERE

XS-327 AM (antimicrobial) is a specially formulated two component, moisture-cure, high solids hybrid water based polyurethane coating designed for
application over completed concrete surfaces. XS-327 ANTIMICROBIAL is a penetrating, UV stable, minimal color enhancing sealer, available in both matte
and gloss finishes. At 64% solids (varies upon reduction rate) and 25 g/L VOC this high performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance.

XS-327 ANTIMICROBIAL is ideally suited for both commercial and residential settings applied upon concrete countertops, fireplace surrounds, shower panels,
floor tiles, wall panels, and all Xtreme Series products. Like some other sealers, XS-327 ANTIMICROBIAL becomes food safe upon curing.

Formulated with an antimicrobial agent, it further contributes to safety and wellness by inhibiting the growth of bacteria, mold and algae on treated surfaces
in food service, medical, commercial and residential environments. It is stain resistant to most household chemicals and culinary items, and is heat resistant to
300°F (149°C). XS-327 ANTIMICROBIAL is distinctive in its ability to be touched up or repaired.

XS 327 ANTIMICROBIAL is also suitable for numerous interior or exterior surfaces including but not limited to polished concrete, broom finish concrete, stained
concrete, decorative concrete, exposed concrete, honed and polished travertine, white Carrera marble, natural stone, pavers, synthetic stone, unglazed tile, and
brick. It excels in performance on vertical and horizontal surfaces. Examples of vertical surface included but are not limited to Precast walls, block walls, decorative concrete walls, and paver retaining walls. Suitability tests are recommended for each substrate to help determine coverage rates. Can be applied to fresh concrete as soon as 14 days, 24-48 hours for thin overlayment’s.

XS 327 AM invisibly protects chemically hardened industrial floors, commercial facilities, machine shops, auto repair facilities from oil, salts and water damage. It helps protect from prolonged exposure to food items such as vinegar, soda, and pickle juice.

XS 327 AM QUICK FACTS

Sheen | Semi-Gloss & Matte

Components | Dual (2)

Packaging | 40 oz. kit

Mix Ratio | 3:2     (3-parts A to 2-parts B)

Maximum Pot Life | 30 Minutes

Ready for Recoat | Dry to touch

Recoat Window | After 12 hours sanding required

Light Duty Use | 24 hours

Full Cure | 7 days

XS 327 AntiMicrobial Testing Data

• Appearance (cured) | Translucent matte or gloss
• Water Resistance | Excellent, beads water
• Mechanical Stability | Excellent
• Light Stability | Excellent
• Solids | 64% as packaged
• Appearance (wet) | Milky
• Odor | Sweet
• Application Temperature | 60°F – 90°F (16°C – 32°C)
• VOC Content | 25 g/L before dilution
• Pot life | Approximately 30 mins
• Gardener Direct / Reverse Impact | >160 inch pounds
• Taber Abrasion | 40-60 mg loss
• QUV – A | <5.0 @ 2000 hours
• Gloss retention | >95% @ 2000 hours