Deccofloor MicroQuartz

Deccofloor MicroQuartz is a premium one-component, polymer-modified, cement based topping for the resurfacing of both vertical and horizontal concrete surfaces. Our high-strength formula allows you to create elegant decorative finishes. Choose from any of our 15 signature color blends and decorative aggregates.

Our system is comprised of a primer, aggregate body coat, and a clear top coat. It is typically applied from 1/16″ to 1/8″ thick. Allowing you to create both a smooth or textured surface.

Deccofloor MicroQuartz Attributes

• UV resistant
• Low VOC system (<100 g/l)
• 25 sq. ft. per gallon coverage rate
• Meets USDA/FDA guidelines
• Designed for interior and exterior applications
• Available in 15 Signature Color Blends
• Provides a seamless joint free surface
• Provides a decorative surface resistance to slipping
• Designed for interior and exterior applications

How To Prepare Concrete for MicroQuartz?

Concrete should always be fully cured, typically this is 28-days from pour. First make sure the surface is clean and properly profiled. This means there should be no dirt, grease, gas, chipping paint, or spalls deeper then 1/16″. Concrete must be structurally sound and all loose material removed. When profiling the surface, a minimum Concrete Surface Profile (CSP) #3 is recommended. Typically achieved by mechanically grinding the surface.

What Is The Best Way To Apply Deccofloor Overlay?

1. In case of non-porous surface apply Deccofloor Primer. If the surface has the minimum CSP
   #3 this step can be avoided
2. Open Deccofloor MicroQuartz container and mix well for 1 – 2 minutes to assure aggregate is
   well mixed and there are no clumps or settled material on the bottom of the container.
3. Apply the Deccofloor MicroQuartz with a trowel, squeegee or hopper gun. Deccofloor
   MicroQuartz is typically applied in one coat, but a second coat can be applied after the initial
   coat is dry to the touch.
4. Deccofloor MicroQuartz can be applied to a thickness ranging from 1/16 inch to 1/8 inch. For
   a smooth finish, trowel the surface while the material is still wet. For a rough stone appearance,
   texture the material during application with a trowel or broom. Various methods can be used to
   provide texture.
5. Allow the material to dry for 4-6 hours before light traffic and 24 hours for
   regular traffic. Temperature and humidity will affect dry times.
6. The treated area should be protected from rain or moisture for 6 hours after installation.
   Work must cease in inclement weather such as rain or temperatures below 45 °F.
7. Use warm water and soap to remove any Deccofloor MicroQuartz from tools or other
   surfaces prior to the product drying. Once Deccofloor MicroQuartz dries it is extremely difficult
   to remove. Strong solvents like Methyl Ethyl Ketone (MEK) or Xylene are required to remove
   dried material.