Concrete Floor Overlay Products
Micro Topping – Thin Concrete Overlay Tight Troweled
 |
SureCrete’s Micro Topping is a single component, self-bonding, cement-based, extremely thin concrete overlay for interior concrete surfaces. Micro Topping was designed to yield an exceptionally smooth tight-troweled finish that can provide a new “blank canvas” for decorative concrete floors. It may also be placed vertically on interior walls, creating the look of Venetian plaster. Application is accomplished by trowel or “magic trowel.” Micro Topping is prepared with gray cement or white cement that may accept Color Packs. |
SKU’s
40 lb bag grey – 25103002
40 lb bag white – 25103003
Micro Topping Specs
Coverage – Approx 200-300 sqft (Varies based on substrate and application) VOC Rating – 0 g/L Shelf Life – 1 year in original unopened container Mixing Ratio – 5-6 quarts water per 40 lb bag Base Color – White or Gray Density – 126.1 lbs/cuft Compressive Strength – ASTM C-109: 4,278 PSI @ 28 days Flexural Strength – ASTM C-348: 995 PSI @ 28 days Tensile – Strength ASTM C-190: 440 PSI @ 28 days Abrasion Resistance – ASTM D-4060: 28 days %loss – 500 cycles – less than 0.50% Mosaic Shear – ANSI A 118.4: 280 PSI @ 28 days
SureSpray – Sprayable Concrete Overlay Mix Floor Texture
 |
SureCrete’s SureSpray is a cement-based thin sprayable concrete overlay for both interior and exterior concrete surfaces. Perhaps no other bag mix lends itself to such an enormous array of applications, variations, and alternatives: from the simplest of orange-peel to the elegant Euro-texture. SureSpray was designed to be applied by compressed air spray equipment (commonly a hopper gun), but may also be troweled or squeegeed. Restoration, repair, resurfacing, architectural accenting, surface protection, and creating slip resistance of existing concrete are all realized through SureSpray. Special copolymers create adhesion and flexibility essential in a thin overlay. SureSpray is seasonally user-friendly, available in Summer and Winter mixes. |
SKU’s
50 lb bag summer – 25101005
50 lb bag winter – 25101006
SureSpray Specs
Coverage – Approx 125 – 175 sqft per 50 lb bag (Varies based on substrate and application) VOC Rating – 0 g/L Shelf Life – 1 year in original unopened container Mixing Ratio – 4 – 6 quarts water per 50 lb bag Base Color – White Curing Bases – Summer & Winter Mix Designs Density – 126.1 lbs./cuft Compressive Strength – ASTM C-109: 4,278 PSI @ 28 days Flexural Strength – ASTM C-348: 995 PSI @ 28 days Tensile Strength – ASTM C-190: 440 PSI @ 28 days Abrasion Resistance – ASTM D-4060: less than 0.50% @ 28 days Mosaic Shear – ANSI A-118.4: 280 PSI @ 28 days
SureTex – Concrete Knockdown Overlay Resurface
 |
SureTex is a cement-based thin overlay for both interior and exterior concrete surfaces. Its slightly larger aggregate creates deeper textures, and its chemistry allows quicker surface drying than most overlay products. Although SureTex is frequently applied by compressed air spray equipment (commonly a hopper gun), it was additionally designed to be troweled from the simplest of knock-down to the most elegant Euro-texture. Restoration, repair, resurfacing, architectural accenting, surface protection, and creating slip resistance of existing concrete are all realized through SureTex. It is seasonally user-friendly, available in Summer and Winter mixes. |
SKU’s
50 lb bag summer – 25101009
50 lb bag winter – 25101010
SureTex Specs
Coverage – Approx 125 – 175 sqft per 50 lb bag (Varies based on substrate and application) VOC Rating – 0 g/L Shelf Life – 1 year in original unopened container Mixing Ratio – 4 – 6 quarts water per 50 lb bag Base Color – White Curing Bases – Summer & Winter Mix Designs Density – 126.1 lbs/cuft Compressive Strength – ASTM C-109: 4,269 PSI @ 28 days Flexural Strength – ASTM C-348: 980 PSI @ 28 days Tensile Strength – ASTM C-190: 440 PSI @ 28 days Abrasion Resistance – ASTM D-4060: less than 0.50% @ 28 days Mosaic Shear – ANSI A-118.4: 275 PSI @ 28 days
SureBroom – Broom Concrete Overlay Mix 6,000 PSI
 |
SureBroom is the premier high-strength thin broom concrete overlay for extreme trafficked areas. Its formulation is designed to transform old, spalled, dull concrete to a freshly broomed surface. Typical areas requiring SureBroom include high rise parking decks, driveways, sidewalks, parking lots, and retail store fronts. Although designed to be broomed, it may also emulate the many designer looks of other thin overlays. SureBroom may be applied with a concrete broom or by a combination of compressed air spray equipment and/or trowel / squeegee. Restoration, repair, resurfacing, architectural accenting, surface protection, and creating slip resistance of existing concrete are all realized through SureBroom. |
SKU’s
50 lb bag summer – 25101003
50 lb bag winter – 25101004
SureBroom Specs
Coverage – Approx 90 sqft @ 2 coats per 50 lb bag (Varies based on substrate and application) VOC Rating – 0 g/L Shelf Life – 1 year in original unopened container Mixing Ratio – 4 – 6-1/2 quarts water per 50 lb bag Base Color – White or Gray Density – 132 lbs/cuft Compressive Strength – ASTM C-109: 6,128 PSI @ 28 days Flexural Strength – ASTM C-78: 1,575 PSI @ 28 days Tensile Strength – ASTM C-190: 910 PSI @ 28 days Abrasion – Concrete Broom Overlay Resistance ASTM C-944: 1 day – 1 gram lost, 7 days- 1 gram lost Shear Bond – ASTM C-882: 1,232 PSI @ 7 days, 1,695 PSI @ 28 days
SureStamp – Stamp Concrete Overlay – 3D Floor Bag Mix
 |
SureCrete’s SureStamp, a stamp concrete overlay is a stampable cement-based topping for beautifying both interior and exterior concrete surfaces. For existing plain concrete, it creates textures that resemble a whole array of designs: tile, cut stone, slate, boardwalk, brick, cobblestone, etc. with traditional concrete stamping tools. Costly tear-out and replacement of existing concrete is eliminated. SureStamp offers restoration, repair, resurfacing, architectural accenting, and surface protection of existing concrete. SureBond (see TDS) a cement-based bonding agent, must be used in combination with SureStamp to achieve the ultimate adhesion essential in a stampable overlay. It is seasonally user-friendly, available in Summer and Winter mixes. |
SKU’s
50 lb bag summer – 25101007
50 lb bag winter – 25101008
SureStamp Specs
Coverage – 15-18 sqft @ 3/8″; 20-24 sqft @ 1/4″ VOC Rating – 0 g/L Shelf Life – 1 year in original unopened container Mixing Ratio – 3.5 –4 quarts water per 50 lb bag Base Color – White Curing Bases – Summer & Winter Mix Designs Density – 132 lbs/cuft Compressive Strength – ASTM C-109: 4,350 PSI @ 28 days Flexural Strength – ASTM C-348: 945 PSI @ 28 days Tensile Strength – ASTM C-190: 440 PSI @ 28 days Abrasion Resistance – ASTM D-4060: less than 0.55% @ 28 days T-BAR Adhesion – (Durock) 190.3 PSI @ 28 days Shear Strength – ANSI A-118.4: 280 PSI @ 28 days
Concrete Wall Overlay Products
Wall Spray – Thin Concrete Wall Overlay Self Bonding
 |
Wall Spray is a concrete wall overlay that is a cement-based overlay designed for both interior and exterior vertical surfaces. It offers a wide variety of finishes from a simple knock-down to a sophisticated faux Venetian Plaster. Wall Spray may be applied by compressed air spray equipment and/or by trowel. Restoration, repair, resurfacing, architectural accenting, and surface protection of existing cladding are all realized through Wall Spray. Typical areas include retention walls, entry/accent walls, columns, gable ends, fireplace accents, and any other vertical surfaces or walls. Wall Spray is formulated to provide excellent bonding to new as well as existing concrete, concrete block, ICF, polystyrene foam, drywall, plaster, plywood, and even painted surfaces. |
SKU’s
40 lb bag – 25101011
Wall Spray Specs
Coverage – Approx 28-30 sqft @ 1/4″ (Varies based on substrate and application) VOC Rating – 0 g/L Shelf Life – 1 year in original unopened container Mixing Ratio – 3.5 – 4 quarts water per 40 lb bag Density – 121 lbs/cuft Compressive Strength – ASTM C-109: 2,870 PSI @ 28 days Flexural Strength – ASTM C-348: 950 PSI @ 28 days Tensile Strength – ASTM C-190: 140 PSI @ 28 days Abrasion Resistance – 28 days %loss – 500 cycles – less than 0.40% Mosaic Shear – ANSI A 118.4: 275 PSI @ 28 days Water Permeability – ASTM D2247: Passes Freeze/Thaw @ 50 cycles
Wall Stamp – Concrete Wall Stamp a Thick Build Mix
 |
SureCrete’s is a Concrete Wall Stamp that is a lightweight, single component cement-based overlay designed for both interior and exterior vertical surfaces. When stamped the texture can resemble an array of designs: cut stone, random stone, brick, slate, etc. Alternatively Wall Stamp may be textured and “cut” free-hand. It offers restoration, repair, resurfacing, and architectural accenting of existing vertical surfaces. Typical areas include retention walls, entry/accent walls, columns, gable ends, fireplace accents, and any other vertical surface or wall. Wall Stamp is formulated to provide excellent bonding to new as well as existing concrete, concrete block, ICF, polystyrene foam, drywall, plaster, plywood, and even painted surfaces. |
SKU’s
40 lb bag – 25101012
Wall Stamp Specs
Coverage – Approximately 18 square feet @ 3/8″ (Varies based on substrate and application) VOC Rating – 0 g/L Shelf Life – 1 year in original unopened container Mixing Ratio – 5-6 quarts water per 40 lb bag Base Color – Light Gray Density – 118 lbs per cubic foot Compressive Strength – ASTM C-109: 2,600 PSI @ 28 days Flexural Strength – ASTM C-348: 950 PSI @ 28 days Tensile Strength – ASTM C-190: 140 PSI @ 28 days Abrasion Resistance – 28 days %loss – 500 cycles– less than 0.40% Mosaic Shear – ANSI A 118.4: 275 PSI @ 28 days Water Permeability – ASTM D2247: Passes Freeze/Thaw @ 50 cycles
Concrete Overlay Accessories
SureBond – Adhesive Bonding Agent for SureCrete Overlays
 |
SureCrete’s SureBond is a single component, just add water, concrete bonding agent for that is a cement based bonding agent specifically developed for SureCrete’s patching products and SureStamp stamped overlayment, as well as the Deep Level large concrete patching blend. Its only function is to join these products to the host surface (i.e. concrete.) SureBond is composed of a high concentration of latex modifier and cement with a very fine sand for aggregate. SureBond is packaged in a white mix (can add color pack) and a grey mix. |
SKU’s
50 lb bag – 25101002
SureBond Specs
Coverage – Approximately 300-450 square feet per 50 lb bag (Varies based on substrate pourosity)
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Mixing Ratio – 7 quarts water per 50 lb bag
Base Color – White or Gray
SureRelease Liquid – Liquid Stamp Overlay Tool Releasing Agent
 |
SureCrete’s SureRelease concrete liquid release is a colorless, bubblegum scented petroleum distillate formulated to release any decorative imprinting tool from concrete or polymer modified cement-based topping. SureRelease provides a lubricating barrier that also protects and prolongs the life of stamped flooring surfaces. |
SKU’s
5 gal pail – 25102001
SureRelease Specs
Coverage – Approximately 1,200 square feet per 5 gal pail (Varies based on amount applied)
Shelf Life – 1 year in original unopened container
Odor – Bubblegum Scented
