Concrete Cleaning and Moisture Products


Concrete Cleaning and Etching

SCR – Concrete Cleaner De-Greaser and Etcher

Concrete Cleaner De-Greaser and EtcherSCR is the safe alternative to muriatic acid, contains no toxic heavy metals, or ozone-depleting solvents. With its high concentration detergent balanced with acid, SCR is the premier one step surface preparation material ensuring a measure of concrete cleaning, degreasing, and profiling. Its multi-function, environmentally friendly properties include cleaning and preparing a wide variety of substrates and surfaces.

SKU’s

1 gal – 15104002
5 gal – 15104003

SCR Specs

Coverage – Varies on substrate: approx. 150 sqft/gallon
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Appearance – Green liquid
Odor – Mint

Links

Get Best
SCR
Price Now

Concrete Moisture Mitigation

LD 1800 – Concrete Lithium Densifier

Concrete Lithium Densifier ProductSureCrete’s LD1800 concrete lithium densifier provides a clean, safe, economical “stand-alone” finished concrete floor. This penetrating treatment reacts chemically with the free lime in concrete to produce calcium silicate hydrate within the concrete pores, making the concrete stronger and more durable. LD1800 is a most desirable alternative to conventional sodium or potassium sodium hardeners that leave a high concentration of salts deposited upon the surface. It will not contribute to alkali silicate reaction (ASR). LD1800 is non-flammable, VOC compliant, environmentally safe, and nonstaining.

SKU’s

1 gal – 15102012
5 gal – 15102011

LD1800 Specs

Coverage – approx 300-400 sqft/gallon
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Drying Time – 1-2 hours
Solids Content – 15%

Links

Get Best
LD-1800
Price Now

Elasto-Shield – Concrete Water-Proofing Membrane Elastomeric Liquid

Concrete Water-Proofing Membrane Elastomeric LiquidSureCrete’s Elasto-Shield is a ready-to-use concrete waterproofing and crack prevention elastomeric liquid membrane that provides water-proofing for all SureCrete cement-based coatings systems. No catalyst or solvents are part of this water borne system. No special safety equipment or respirators are required (unless sprayed). The lack of a catalyst eliminates pot-life problems. The single component formulation may be applied by brush, roller, or airless sprayer to many construction substrates.

SKU’s

5 gal – 15102009

Elasto-Shield Specs

Coverage – Up to 750 sqft per pail @ 2 coats or 16 mils wet VOC Rating – 0 g/L Shelf Life – 1 year in original unopened container Adhesion – Cement Board – substrate fails; Plywood – substrate fails; Polystyrene – substrate fails; Thin-Set – 395 PSI Elongation – ASTM D-638: 7 day dry – 580%; 21 day wet – 657% Permeability – ASTM E-96: 0.013 Tensile – ASTM E-96: 7 day dry – 335 PSI; 21 day wet – 562 PSI

Links

Get Best
Elasto-Shield
Price Now

Concrete Overlay Retarders and Delays

Retarder – Liquid Concrete Retarder for Slowing Curing

Concrete Retarder for Slowing CuringSureCrete’s concrete retarder is a safe non-hazardous, water borne retarder for cementitious products. It was designed specifically to slow the set of SureTex, SureSpray, or SureStamp that are seasonally adjusted to “winter” mix design. While a more rapid set is a desirable feature for cold weather or interior applications, “winter” mix can be unmanageable in warmer weather, especially exterior applications. Retarder can slow the rapid set of the “winter” mix.

SKU’s

1 gal – 15102001
5 gal – 15102002

Retarder Specs

Coverage – Varies on overlay mix: SureStamp – 3 oz; SureSpray – 8 oz; SureTex – 7 oz
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Appearance – Clear Liquid

Links

Get Best
Concrete Retarder
Price Now

Surface Delay – Premium Concrete Surface Delay

Concrete Surface Delay ProductSureCrete’s concrete surface delay is a transparent blue, soapy odor, non-hazardous, concentrated, film-forming solution that is designed to retard the initial evaporation of water from freshly placed concrete or stamp overlay during finishing operations. Surface Delay is especially effective for conditions that include high wind, low humidity, high temperature or any combination. Concrete can be placed with a lower slump, even under rapid drying conditions, helping to reduce related shrinkage, cracking or surface checking by slowing initial evaporation of bleed water.

SKU’s

1 gal – 15102003
5 gal – 15102004

Surface Delay Specs

Coverage – 200-400 sqft/gallon
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Appearance – Milky, opaque color
Odor – Solvent

Links

Get Best
Surface Delay
Price Now

Concrete Surface Primers

EcoPrime – Concrete Primer

Concrete Primer ProductSureCrete’s Eco-Prime concrete primer was created for substrates that are excessively porous. Particularly concrete that was finished poorly (not closed with a steel trowel), broomed, or very old concrete may absorb Eco-Stain so deeply that little color, if any, is visible. Eco-Prime reduces the porosity allowing the color to reach full development. Eco-Prime is clear and will leave no color when dry. Eco-Prime may be used across an entire project if excessive porosity is apparent. It may also be used on just those isolated areas that are “open”.

SKU’s

1 gal – 35102010
5 gal – 35102011

EcoPrime Specs

Coverage – Varies on substrate – 200-300 sqft/gallon/coat
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container

Links

Get Best
ECO Prime
Price Now

SurePrime – Concrete Bonding Agent

Concrete Overlay Bonding Agent ProductSureCrete’s SurePrime is a 28% solids concrete bonding agent copolymer emulsion (vinyl acetate ethylene or VAE) designed for use in combination with cement based overlays as a bonding agent. SurePrime offers advantages when placing an overlay to its intended substrate: Improved Adhesion, Reduced Permeability, Increased Abrasion Resistance, Improved Flexural Strength, Improved Tensile Strength, Enhanced Freeze/Thaw Durability

SKU’s

1 gal – 15102007
5 gal – 15102008

SurePrime Specs

Coverage – Varies on substrate – 150-200 sqft/gallon/coat
VOC Rating – 0 g/L
Shelf Life – 6 months in original unopened container
Solids Content – 28%
Viscosity – 1200 cps
pH – 5.8
Density – 8.7 lbs/gal (1,044 g/L)
Mechanical Stability – Excellent
Water Resistance – Good
Film Clarity – Hazy

Links

Get Best
SurePrime
Price Now

Polymer Concentrate – Stand-Alone Acrylic Product

Concrete Polymer Concentrate ProductPolymer Concentrate will enhance the properties of any concrete and is typically used for patching materials, bridge decks, grouts, stucco, decorative thin cement based overlays.

SKU’s

5 gal – 15102005

Polymer Concentrate Specs

Coverage – Varies on mix design/formulation
VOC Rating – 0 g/L
Shelf Life – 6 months in original unopened container
Solids Content – 55%
Viscosity – 2400 cps
pH – 4.5
Density – 8.9 lbs/gal (1,066 g/L)
Mechanical Stability – Excellent
Water Resistance – Good
Film Clarity – Hazy

Links

Get Best
Polymer
Price Now

Concrete Sealer Coating Removal

EviroStrip – Environmentally Friendly Water-Based Coating Removal

Water-Based Concrete Coating Removal ProductSureCrete’s EnviroStrip is a non-flammable, water-based stripper for acrylic coating or deeply embedded greasy soil removal on concrete floors. It has a pleasant fresh citrus smell and performs effective stripping without the use of flammable solvents and harsh chemicals.

SKU’s

1 gal -15102014

EnviroStrip Specs

Coverage – approx 150 square foot /gallon
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Odor – Fresh citrus

Links

Get Best
EviroStrip
Price Now

GlueRemove – Carpet Glue and Mastic Removal

Concrete Carpet Glue Remover ProductSureCrete’s Carpet Glue Remove is a safe, non-flammable, water-based glue and mastic remover that effectively softens and removes most types of carpet adhesives and similar glue deposits. GlueRemove is ideal for use in occupied areas like post offices, schools, hospitals and other public places. Removing vinyl and ceramic mastic is a snap with this user-friendly product. When pulling up carpet or VCT, vinyl tile, there is almost always a glue residue left on the surface of the substrate floor.

SKU’s

1 gal – 15102016

GlueRemove Specs

Coverage – Varies: approx 150 square foot /gallon
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Appearance – Green Liquid
Odor – Pleasant

Links

Get Best
GlueRemove
Price Now

FastStrip Plus – Heavy Duty Solvent Sealer Removal

Heavy Duty Solvent Concrete Sealer Removal ProductSureCrete’s FastStrip Plus is a high-powered, solvent-based concrete stripper for heavy coatings and the most difficult to remove sealers. Specially formulated to be used indoors or out, wherever water can be used to flush off the sealer. FastStrip Plus contains biodegradable surfactants and non-chlorinated solvents.

SKU’s

5 gal – 15104004

FastStrip Plus Specs

Coverage – Varies: approx 150 square foot /gallon
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Appearance – Straw Color
Odor – Solvent

Links

Get Best
FastStrip
Price Now