Clear Concrete Paints and Sealers and Epoxy


Acrylic Concrete Cure and Seals

SureSeal CS 250 – Concrete Cure and Seal 25% Solids

Concrete Cure and Seal 25% SolidsCS 250 is a 25% solids finishing membrane that enhances the curing process of freshly placed concrete and provides protection simultaneously. Upon application it forms a water retentive film that beneficially restricts moisture loss allowing concrete to reach its optimal cure and hardness, providing an economical alternative to costly, time-consuming water curing. The formulation of Cure n’ Seal makes it possible, as the name suggests, for it to be applied during the curing process of freshly poured concrete.

SKU’s

5 gal – 55104002

SureSeal CS 250 Specs

Coverage – Approximately 300-500 square feet per gallon, per coat (varies widely based on substrate and application method)
VOC Rating – less than 600 g/L
Solids Content – 25%
Shelf Life – 2 years in original unopened container
Ready for re-coat – 24 hours
Light Duty Use – 24 hours
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
CS-250
Price Now

SureSeal CS 250L – Low VOC Cure and Seal for Concrete 25% Solids

Low VOC Cure and Seal for Concrete 25% SolidsCS 250L is a 25% solids, low VOC cure and seal (400 g/L) finishing membrane that enhances the curing process of freshly placed concrete and provides protection simultaneously. Upon application it forms a water retentive film that beneficially restricts moisture loss allowing concrete to reach its optimal cure and hardness, providing an economical alternative to costly, time-consuming water curing.

SKU’s

1 gal – 15102003
5 gal – 15102004

SureSeal CS 250L Specs

Coverage – Approximately 300-500 square feet per gallon, per coat (varies widely based on substrate and application method)
VOC Rating – less than 400 g/L
Solids Content – 25%
Shelf Life – 2 years in original unopened container
Ready for re-coat – 24 hours
Light Duty Use – 24 hours
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Low VOC Cure and Seal for Concrete 25% Solids InfoTDS, SDS

Get Best
CS-250L
Price Now

SureSeal CS 125L – Low VOC Concrete Cure and Seal 12.5% Solids

Low VOC Concrete Cure and Seal 12.5% SolidsCS 125L is a 12.5% solids, low VOC (400 g/L) finishing membrane that enhances the curing process of freshly placed concrete and provides protection simultaneously. Upon application it forms a water retentive film that beneficially restricts moisture loss allowing concrete to reach its optimal cure and hardness, providing an economical alternative to costly, time-consuming water curing.

SKU’s

5 gal – 55104001

SureSeal CS 125L Specs

Coverage – Approximately 300-500 square feet per gallon, per coat (varies widely based on substrate and application method)
VOC Rating – less than 400 g/L
Solids Content – 25%
Shelf Life – 2 years in original unopened container
Ready for re-coat – 24 hours
Light Duty Use – 24 hours
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
CS-125L
Price Now

Clear Acrylic Concrete Sealers

SureSeal HS 240 – Driveway and Pool Deck Concrete Sealer Premium Acrylic Low VOC

 Driveway and Pool Deck Concrete Clear Sealer SureCrete’s HS 240 is a premium, high performance, single-component, 20% acrylic solids, low VOC (400 grams per liter), sealer designed for concrete or any cement based product. As with most acrylics it is vapor permeable and readily applies outside. However, HS 240 is specially formulated for extreme climates where a low VOC sealer is required. Its nano-sealer technology deeply penetrates and reacts internally with cement, slowing moisture migration and efflorescence and intensifying bond capacity. Even in warmer climates HS 240’s slower evaporating solvents will not apply a cotton candy effect before the applicator can finish a tight, smooth surface. A single coat application will provide a UV shield, enhance the beauty, and protect the surface of driveways, garage floors, patios, walkways, pool decks, and stucco.

SKU’s

5 gal – 55104004

SureSeal HS 240 Specs

Coverage – Approximately 200-240 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 400 g/L
Solids Content – 20%
Shelf Life – 2 years in original unopened container
Ready for re-coat – 24 hours
Light Duty Use – 24 hours
Heavy Traffic Ready – 72 hours
Concrete Driveway Sealer Appearance (cured) – Clear Gloss or Matte
Concrete Driveway Sealer Wet Appearance – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
HS-240
Price Now

SureSeal HS 340 – Acrylic Stamped Concrete Sealer Low VOC

Acrylic Stamped Concrete Sealer Low VOCSureCrete’s HS 340 is a premium, high performance, single-component, 30% acrylic solids, low VOC (400 g/l), sealer designed for SureCrete overlays or other cement-based products like a clear stamped concrete sealer. As with most acrylics it is vapor permeable and readily applies outside. However, HS 340 is specially formulated for extreme climates where a low VOC sealer is required. Its nano-sealer technology deeply penetrates and reacts internally with cement, slowing moisture migration and efflorescence and intensifying bond capacity. Even in warmer climates HS 340’s slower evaporating solvents will not show a cotton candy effect before the applicator can finish a tight, smooth surface. A single coat application will provide a UV shield, enhance the beauty, and protect the surface of driveways, garage floors, patios, walkways, pool decks, and stucco.

SKU’s

5 gal – 55104006

SureSeal HS 340 Specs

Coverage – Approximately 200-240 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 400 g/L
Solids Content – 30%
Shelf Life – 2 years in original unopened container
Ready for re-coat – 24 hours
Light Duty Use – 24 hours
Heavy Traffic Ready – 72 hours
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
HS-340
Price Now

SureSeal HS 260 – Premium Acrylic Concrete Sealer 600 VOC

Premium Acrylic Concrete Sealer 600 VOCSureCrete’s HS 260 is a premium, high performance, single-component clear acrylic sealer, 20% acrylic solids, 600 g/l, sealer designed for concrete or any cement based product. As with most acrylics it is vapor permeable and readily applies outside. However, HS 260 is specially formulated for extreme climates. Its nano-sealer technology deeply penetrates and reacts internally with cement, slowing moisture migration and efflorescence and intensifying bond capacity. Even in warmer climates HS 260’s slower evaporating solvents will not show a cotton candy effect before the applicator can finish a tight, smooth surface. A single coat application will provide a UV shield, enhance the beauty, and protect the surface of driveways, garage floors, patios, walkways, pool decks, and stucco.

SKU’s

5 gal – 55104005

SureSeal HS 260 Specs

Coverage – Approximately 200-240 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 600 g/L
Solids Content – 20%
Shelf Life – 2 years in original unopened container
Ready for re-coat – 24 hours
Light Duty Use – 24 hours
Heavy Traffic Ready – 72 hours
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
HS-260
Price Now

SureSeal HS 360 – Premium Decorative Concrete Overlay Clear Sealer

Premium Decorative Concrete Overlay Clear SealerSureCrete’s HS 360 is a premium, high performance, single-component, 30% acrylic solids, 600 g/L, sealer designed for SureCrete overlays or other cement-based products. As with most acrylics it is vapor permeable and readily applies outside. However, HS 360 is specially formulated for extreme climates. Its nano-sealer technology deeply penetrates and reacts internally with cement, slowing moisture migration and efflorescence and intensifying bond capacity. Even in warmer climates HS 360’s slower evaporating solvents will not give a cotton candy effect before the applicator can finish a tight, smooth surface. A single coat application will provide a UV shield, enhance the beauty, and protect the surface of driveways, garage floors, patios, walkways, pool decks, and stucco.

SKU’s

5 gal – 55104007

SureSeal HS 360 Specs

Coverage – Approximately 200-240 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 600 g/L
Solids Content – 30%
Shelf Life – 2 years in original unopened container
Ready for recoat – 24 hours
Light Duty Use – 24 hours
Heavy Traffic Ready – 72 hours
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
HS-360
Price Now

SureSeal Super WB – 30% Solids Water Based Clear Acrylic Sealer

Solids Water Based Clear Acrylic SealerSureCrete’s Super WB is a 30% solids, water based, low VOC (less than 100 g/L), strong binding, clear, gloss acrylic sealer for SureCrete overlays or any cement based product. This product contains a hybrid, self-cross-linking, acrylic resin with built-in water repellent qualities and tenacious penetration and adhesion. It contains no wax or silicone additives. The coating is chemical resistant, durable, does not blush, has long solids retention, and is easy to clean. Super WB is non-flammable and environmentally safe.

SKU’s

1 gal – 55102002
5 gal – 55102004

SureSeal Super WB Specs

Coverage – Approximately 180-200 square feet per gallon, per coat (undiluted)
VOC Rating – less than 100 g/L
Solids Content – 30%
Shelf Life – 1 year in original unopened container
Ready for re-coat – 24 hours
Light Duty Use – 24 hours
Heavy Traffic Ready – 72 hours
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Water
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
Super Wb
Price Now

SureSeal Super 20 – 20% Solids Concrete Acrylic Sealer

20% Solids Concrete Acrylic SealerSureCrete’s Super 20 is a single-component, 20% acrylic solids, 600 g/L, color enhancing, high gloss sealer developed for concrete or any cement based product. It is vapor permeable, yet reduces the penetration of fluids into the surface. Super 20 will enhance the beauty, improve stain and abrasion resistance, and provide UV protection for driveways, garage floors, patios, walkways, pool decks, stucco, and concrete block.

SKU’s

5 gal – 55104008

SureSeal Super 20 Specs

Coverage – Approximately 180-200 square feet per gallon, per coat
VOC Rating – less than 600 g/L
Solids Content – 20%
Shelf Life – years in original unopened container
Ready for recoat – 24 hours
Light Duty Use – 24 hours
Heavy Traffic Ready – 72 hours
Appearance (cured) – Clear High Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
Super 20
Price Now

SureSeal Super 30 – 30% Solids Concrete Overlay Acrylic Sealer

30% Solids Concrete Overlay Acrylic SealerSureCrete’s Super 30 is a single-component, 30% acrylic solids, 600 g/L, color enhancing, high gloss sealer developed for SureCrete overlays or any cement-based product. It is vapor permeable, yet reduces the penetration of fluids into the surface. Super 30 will enhance the beauty, improve stain and abrasion resistance, and provide UV protection for driveways, garage floors, patios, walkways, pool decks, stucco, and concrete block.

SKU’s

5 gal – 55104009

SureSeal Super 30 Specs

Coverage – Approximately 180-200 square feet per gallon, per coat
VOC Rating – less than 600 g/L
Solids Content – 30%
Shelf Life – 2 years in original unopened container
Ready for re-coat – 24 hours
Light Duty Use – 24 hours
Heavy Traffic Ready – 72 hours
Appearance (cured) – Clear High Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
Super 30
Price Now

Exterior Concrete Sealer Accessories

SureGrip – Non-Slip Additive for Sealers

Non-Slip Additive for SealersSureCrete’s SureGrip is a premium grade polypropylene in a micronized fine texture. It consistently out performs other slip resistant additives in durability, due to its inherent crush resistance. The almost spherical shape of SureGrip will also impart a smoother “feel” than most other slip resistant additives. Low density and insolubility characteristics reduce or eliminate settling when blending into all of SureCrete’s sealers. SureGrip is available in both sealer additive and hand-broadcast formulations. SureGrip Additive is available in two different particle sizes, medium and fine. Heavy-Duty = 840 microns or 20 mesh. Regular = 300 microns or 50 mesh.

SKU’s

1 qt additive – 55103001
1 qt additive HD – 55103003
1 qt broadcast – 55103005

SureGrip Specs

Coverage – 1 quart Additive per 5 gallon pail (varies widely depending substrate and application method)
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Appearance – Fine white powder
CONFIDENCE OF FRICTION FOR SUREGRIP ADDITIVE HD AT 32 OZ PER 5 GAL PAIL ON STEEL TROWELED (SLICK) CONCRETE WITH RUBBER SOLES SUREGRIP:
Raw Concrete Dry: .60 – .64; Wet: .60 – .62
SureSeal Super 20 Dry: .78 – .84; Wet: .74 – .82
Dry w/HD: .90 – 1.0; Wet w/HD: .96 – .98
SureSeal Super WB Dry: .72 – .78; Wet: .68 – .72
Dry w/HD: .90 – .98; Wet w/HD: .82 – .86
SureSeal Pigmented SB Dry: .92 – .96; Wet: .82 – .86
Dry w/HD: .94 – .96; Wet w/HD: .84 – .88
SureSeal Pigmented WB Dry: .72 – .78; Wet: .68 – .70
Dry w/HD: .90 – 1.0; Wet w/HD: .96 – .98
Dura-Kote Polyurethane SB Dry: .66 – .72; Wet: .76 – .78
Dry w/HD: .80 – .84; Wet w/HD: .78 – .82
Dura-Kote Polyurethane WB Dry: .64 – .68; Wet: .64 – .66
Dry w/HD: .80 – .84; Wet w/HD: .72 – .84
Dura-Kote Epoxy WB Dry: .96 – .98; Wet: .82 – .86
Dry w/HD: .96 – .98; Wet w/HD: .88 – .90
Dura-Kote PFC-120 Dry: .66 – .72; Wet: .76 – .78
Dry w/HD: .80 – .84; Wet w/HD: .78 – .82

Links

Get Best
SureGrip
Price Now

Polyaspartic Concrete Coatings

DuraKote PFC-120 – 2 Hour Cure 67% Solids Clear Polyaspartic Coating

2 Hour Cure 67% Solids Clear Polyaspartic CoatingSureCrete’s Dura-Kote PFC-120 is a specially formulated 67% solids hybrid solvent based polyaspartic coating designed for application over interior concrete, cement based overlays, or as a top finish coat on epoxy systems. Dura-Kote PFC-120 provides a low VOC (330 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss wear surface. The high performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. As a vertical wall coating, it enhances anti-graffiti properties. Dura-Kote PFC-120’s rapid cure time eliminates excessive waiting to return a floor to service. Unlike many polyaspartics, it has a user-friendly pot life of approximately 20 – 30 minutes. Turnaround time for a floor may be as little as 5 – 6 hours. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

SKU’s

2 gal kit – 55104023
5 gal kit – 55104024

Dura-Kote PFC-120 Specs

Coverage – Approximately 300-400 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 330 g/L
Solids Content – 67%
Pot Life – approximately 30 minutes
Shelf Life – 1 year in original unopened container
Ready for re-coat – 1-2 hours (4-5 hours at low temperatures)
Light Duty Use – 3-4 hours (24-36 hours at low temperatures)
Heavy Traffic Ready – 24-36 hours (3-4 days at low temperatures)
Full Cure – 1-2 days (Up to 7 days at low temperatures)
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Odor – Aromatic
Application Temperature – 32 – 90 degrees Fahrenheit
Gardener direct / Reverse impact – More than 160 inch pounds
Taber Abrasion – 40-60 mg loss
QUV – A – less than 5.0 at 2,000 hours
Gloss Retention – More than 95% at 2,000 hours

Get Best
Clear PFC-120
Price Now


DuraKote PFC-180 – 4 Hour Cure Thick Build Polyaspartic Clear Coating

Thick Build Polyaspartic Clear CoatingDura-Kote PFC-180 is a specially formulated 80% solids hybrid solvent based polyaspartic coating. Unlike many polyaspartics, it has a user-friendly pot life of approximately 20 minutes and the ability to create a moderate build (6 ½ mil) single coat top coat. Turnaround time for a floor may be as little as 6 – 8 hours. Epoxy flakes may be covered in a single pass. Dura- Kote PFC-180 provides a low VOC (less than 200 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss, moderate build wear surface. The rapid cure time eliminates excessive waiting to return a floor to service. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

SKU’s

2 gal kit – 55104025
5 gal kit – 55104026

DuraKote PFC-180 Specs

Coverage – Approximately 150-200 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 200 g/L
Solids Content – 80%
Pot Life – approximately 20 minutes
Shelf Life – 1 year in original unopened container
Ready for re-coat – Approximately 2 hours (6-8 hours at low temperatures)
Light Duty Use – 4-6 hours (Up to 24 hours at low temperatures)
Heavy Traffic Ready – Approximately 24 hours (Up to 3 days at low temperatures)
Full Cure – 1-2 days (Up to 7 days at low temperatures)
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Odor – Aromatic
Application Temperature – 32 – 90 degrees Fahrenheit
Gardener direct / Reverse impact – More than 160 inch pounds
Taber Abrasion – 40-60 mg loss
Gloss Retention – More than 95% at 2,000 hours

Get Best
Clear PFC-180
Price Now


Clear Polyurethane Concrete Coatings

DuraKote Polyurethane SB – High Gloss Concrete Polyurethane Sealer

High Gloss Concrete Polyurethane SealerDura-Kote Polyurethane SB is a 2 component 51% solids, acrylic aliphatic polyurethane designed as a non-yellowing clear coating for interior concrete, cement based overlays, or as a top finish coat on epoxy systems. The high performance clear top coat generates the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance that is both user-friendly and extremely durable. As a vertical wall coating, it enhances anti-graffiti properties. Dura-Kote Polyurethane SB is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

SKU’s

2 gal kit gloss – 55104019
5 gal kit gloss – 55104020
2 gal kit satin – 55104021
5 gal kit satin – 55104022

DuraKote Polyurethane SB Specs

Coverage – Approximately 300-400 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 435 g/L
Solids Content – 51%
Pot Life – approximately 60 minutes
Shelf Life – 1 year in original unopened container
Ready for re-coat – 6-8 hours (18+ hours at low temperatures)
Light Duty Use – 24 hours (Up to 48 hours at low temperatures)
Heavy Traffic Ready – 3 days (Up to 5 days at low temperatures)
Full Cure – 5-7 days (Up to 14 days at low temperatures)
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Mechanical Properties – Direct Impact – 30 inch/pounds; Reverse Impact – 6 inch/pounds
Hardness – Pencil 4H, Konig 100
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit

Links

Get Best
Polyurethane SB Clear
Price Now


DuraKote Polyurethane WB – Clear Coat for Concrete Water Based High Performance

Clear Coat for Concrete Water Based High PerformanceDura-Kote Polyurethane WB is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete, cement based overlays, or as a top finish coat on epoxy systems. The high performance clear top coat, available in gloss or satin finish, provides the durability of a solvent base system with the ease and safety of a low VOC (73 g/L) water base system. Unlike nearly all polyurethanes, Dura-Kote Polyurethane WB has remarkable properties related to vapor permeability that permit its use in an exterior setting. Note: See paragraph 5 under Surface Prep. Generating the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance, it is both user-friendly and extremely durable. As a vertical wall coating, it enhances anti-graffiti properties. Dura-Kote Polyurethane WB is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

SKU’s

2 gal kit gloss – 55102005
4 gal kit gloss – 55102006
2 gal kit satin – 55102007
4 gal kit satin – 55102008

DuraKote Polyurethane WB Specs

Coverage – Approximately 300-400 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 72 g/L
Solids Content – 57%
Pot Life – approximately 30 minutes
Shelf Life – 1 year in original unopened container
Ready for recoat – 6-8 hours (18+ hours at low temperatures)
Light Duty Use – 24 hours (Up to 48 hours at low temperatures)
Heavy Traffic Ready – 3 days (Up to 5 days at low temperatures)
Full Cure – 5-7 days (Up to 14 days at low temperatures)
Appearance (cured) – Clear Gloss or Satin
Appearance (wet) – Milky Liquid
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Water
Odor – Sweet Acrylic
Application Temperature – 50 – 90 degrees Fahrenheit

Get Best
Polyurethane WB Clear
Price Now


Clear Epoxy Concrete Coatings

DuraKote Clear Epoxy WB – 85% Solids Epoxy Primer and Sealer for Interior Concrete

85% Solids Epoxy Primer and Sealer for Interior ConcreteDura-Kote Epoxy WB is a 2 component 85% solids, floor coating for interior concrete and cement based overlays. The high performance clear top coat, provides the durability of a solvent base system with the ease and safety of a low VOC (175 g/L) water base system that is both user-friendly and extremely durable. As a vertical wall coating, it enhances anti-graffiti properties. Unlike nearly all epoxies, Dura-Kote Epoxy WB has remarkable properties related to moisture: Withstands high vapor transmission rate, up to 13 pounds per 1,000 ft² (5.4 kg per 100m²) in 24 hours; Provides a non-permeable vapor barrier, even in basements; Applies on fresh concrete as soon as three days after pouring and placing concrete.

SKU’s

4 gal kit – 55102009

DuraKote Epoxy WB Specs

Coverage – 125-175 square feet per gallon catalyzed product (varies widely based on application method)
VOC Rating – 175 g/L
Solids Content – 85%
Shelf Life – 1 year in original unopened container
Mixing Ratio – 1 part A to 1 part B
Pot Life – Approximately 30 minutes
Ready for recoat – 6-8 hours (18+ hours at low temperatures)
Light Duty Use – Approximately 16 hours (Up to 30 hours at low temperatures)
Heavy Traffic Ready – Approximately 24 hours (Up to 3 days at low temperatures)
Full Cure – Approximately 7 days (Up to 14 days at low temperatures)
Appearance (cured) – Gloss sheen
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Fair
Odor – Epoxy
Application Temperature – 50 – 90 degrees Fahrenheit

Get Best
Clear WB Epoxy
Price Now


DuraKote Epoxy 100 – Clear Thick Build Concrete Sealer

Epoxy 100 - Clear Thick Build Concrete SealerDura-Kote Epoxy 100 is a 2 component 100% solids, zero VOC floor coating system that is used in a wide variety of applications such as, high build clear coat for a host of decorative concrete systems, primer coat and binder coat for Dura-Kote Flakes and Metallics. Yellowing and blush are minimized by the use of an aliphatic amine curing agent for part B, providing a premium, durable clear coating for colored or stained concrete and cement based overlays. For unique, job specific conditions, 2 other specialized part B’s are available, Premium UV and Premium CW. See your SureCrete distributor for details. The high performance, self-leveling characteristics generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable. Dura-Kote Epoxy 100 is ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.

SKU’s

3 gal kit – 55104017

DuraKote Epoxy 100 Specs

Coverage – 100-150 square feet per gallon per coat catalyzed product (varies widely based on application method) VOC Rating – 0 g/L Solids Content – 100% Shelf Life – 1 year in original unopened container Mixing Ratio – 2 parts A to 1 part B Pot Life – 10-20 minutes Ready for recoat – 6-8 hours (18+ hours at low temperatures) Light Duty Use – Approximately 16 hours (Up to 30 hours at low temperatures) Heavy Traffic Ready – Approximately 24 hours (Up to 3 days at low temperatures) Full Cure – 5-7 days (Up to 14 days at low temperatures) Appearance (cured) – High gloss sheen Appearance (wet) – Clear – Straw Color Water Resistance – Excellent, beads water Mechanical Stability – Excellent Light Stability – Yellows Odor – Sweet Adhesion – 400 PSI (concrete failure) Abrasion Resistance (Tabor) – 1,000 gm. load @ 500 cycles = 31 mg loss Compressive Strength – 9,000 PSI Application Temperature – 50 – 90 degrees Fahrenheit

Get Best
Clear Epoxy 100
Price Now


Epoxy Flakes and Metallics

DuraKote Metallics – Pearls for High Gloss Epoxy Flooring

Metallics - Pearls for High Gloss Epoxy FlooringSureCrete’s Dura-Kote Metallics are an exciting new seamless flooring system that provides a unique three dimensional appearance with suspended reflective pigments. There are 20 available reflective pigments that can combine with literally 100’s of colors in the Dura-Kote Epoxies. Due to the vast options offered within this system, one can create floors that range from the elegantly stylish to outrageously bazaar. The exceptionally durable epoxy combined with a polyurethane or polyaspartic top coat make this flooring system ideally suited for nearly any commercial or residential setting. Outstanding customization properties make Dura-Kote Metallics especially appealing for bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, or anywhere that a one of a kind, exceedingly resilient floor is desired.

SKU’s

16 oz jar – 651020XX
(XX defines color)

DuraKote Metallics Specs

Coverage – 16 oz per 3 gal kit catalyzed epoxy product
Dura-Kote Epoxy Metallics’ specs and properties are shared with the specific sealers used to apply them.

Get Best
Epoxy Metallic
Price Now


DuraKote Flakes – Epoxy Colored Flake Floor System

Epoxy Colored Flake Floor SystemSureCrete’s Dura-Kote Flakes system creates a vibrant, multi-hued, seamless, resilient surface from plain gray concrete. Although the system is simple both in composition and installation, it yields an exceptionally durable and long lasting floor. This system is composed of a binder, one of the Dura-Kote Epoxies and Dura-Kote Flakes, random shaped polymer chips, available in 12 color options. The polymer chips provide not only the pleasing palette of color, but also add a measure of slip resistance to the surface. Dura-Kote Epoxy provides the structure and strength of the system. Due to these properties, the Dura-Kote Flakes system is ideally suited for garage floors, commercial kitchens, locker rooms, sports venues, automotive showrooms, veterinarian clinics, laundromats, or anywhere that an exceedingly resilient floor is required.

SKU’s

25 lb bag – 651020XX
(XX defines color)

DuraKote Flakes Specs

Coverage – 125 – 175 square feet (Varies widely based on application techniques)
Dura-Kote Epoxy Flakes’ specs and properties are shared with the specific sealers used to apply them.

Get Best
Epoxy Flake
Price Now


SureFinish – Mop on Floor Wax For Slip Resistance and Protection

Floor Wax For Slip Resistance and ProtectionSureCrete’s SureFinish is an industrial floor finish providing exceptional performance and adherence to both resilient and non-resilient hard surface interior flooring. It may be applied like a conventional floor finish to terrazzo, quarry tile, brick, slate, un-glazed ceramic tile, Mexican tile, and stone surfaces. Additionally, SureFinish is recommended for use on vinyl asbestos, vinyl, reinforced vinyl, asphalt, and other types of resilient floors. It’s superior scuff, scratch, and detergent resistance insures maximum wear with a minimum of maintenance. It is available in both a gloss and matte finish.

SKU’s

1 gal gloss – 55102014
1 gal matte – 55102016

SureFinish Specs

Coverage – 1,500 – 3,000 square feet per gallon per coat (varies widely depending substrate and application method)
VOC Rating – 0 g/L
Shelf Life – 1 year in original unopened container
Slip Resistance – Meets ASTM 2047 standard for slip resistance in floor coatings. The addition of SureFinish to nearly any surface swill increase slip resistance.

Links

Get Best
Floor Wax
Price Now